Last update 24/07/2018

1. Introduction

The Reconciliation module is a tool designed to help you to reconcile your bank statements with the transactions in your Ingenico ePayments Account. Using Reconciliation does not affect transactions or money transfers in any way.  

The Reconciliation module works with selected acquirers and Full Service. Please contact us to see if your acquirer supports reconciliation.

1.1 Data files

A data file is a file comparable to a bank statement, issued by an acquirer. It's also referred to as an EPA file.

Only selected acquirers send data files to our system (please check with our Customer Care department if they apply to you).

Using data files from the acquirers, our system can pre-process the data, making the reconciliation task easier for you.

Important
  • The data file information may not be immediately available in your Ingenico ePayments Account, because some acquirers wait a few weeks before first payment of a new merchant’s transactions, and acquirers usually issue data files after the payout. Thus, Ingenico ePayments does not receive data file information directly after the first transactions, and will receive it after some time.
  • The data file information is never available for transactions older than the date when the Reconciliation module was activated.

2. Reconciliation menu

Once Reconciliation is activated in your Ingenico ePayments account, you can find the button in the top menu of your account.

The Reconciliation menu item contains the following sub-items:

  • Reporting allows you to view your reconciled transactions;
  • Configuration allows you to specify your bank account numbers for the Reconciliation Module and configure Push Reports.
  • Download allows you to download different types of reports directly from your Ingenico ePayments Account.
  • Dispute allows you to see retrieval requests and chargebacks issued for your card transactions (Full Service only)

2.1 Reporting

The reporting screen is divided into 3 tabs. These tabs reflect the full lifecycle of a transaction. A transaction will therefore only appear in one tab at a time, depending on the status.

Reconciliation Reporting lifecycle

Processed transactions: this view compiles all transactions which have been processed on the gateway, but for which the money has not yet been received by Ingenico Financial solutions, and therefore has not yet been paid out.

Your Balance(only for Full Service merchants): this view compiles all transactions which have been processed on the gateway, and for which the money has been received by Ingenico Financial solutions but has not yet been paid out.

Payout view: this view compiles all details of transactions which have been paid out by your acquirer or Ingenico Financial Solutions.

2.1.1 Processed transactions

The "Processed transactions overview" indicates the total number of pending transactions, for which the money has not yet been paid by the acquirer or received by Ingenico ePayments, grouped by currency.

The following columns are displayed:

Name Description Example
Currency Transaction currency EUR
Total paid amount Transaction amount 1 EUR
Number of transactions For grouped transactions, the number of transactions contained in the current line. 1
Action Clicking the "Details" button will take you to the list of included transactions where you can access each transaction's financial history individually. -

Example:

In the "Processed transactions summary based on currency", by selecting a currency in the dropdown menu, you can see details of the pending transactions per brand.

The following columns are displayed:

Name Description Example
Brand Payment method of the transaction EUR
Total paid amount Amount of the transaction 1 EUR
Number of transactions For grouped transactions, the number of transactions contained in the current line. 1
Action Clicking the "Details" button will take you to the list of included transactions where you can access each transaction's financial history individually. -

Example:

By clicking the blue arrow on the left, you can see the details per item type: Payments, Refunds and Deleted payments:

Clicking the details button will take you to the list of included transactions where you can access each transaction's financial history individually.

The following columns are displayed:

Name Description Example
Pay ID
Payment unique identifier
100633195
Merchant transaction ref.
Merchant Order ID
order123ab
Order description
Merchant order description
abc
Order date
Order date (yyyy-MM-dd)
2014-08-07
Payment date
Transaction date (yyyy-MM-dd)
2014-08-07
Gross amount
The total amount of the transaction or group of transactions (including acquirer fees).
This is the amount you see in the back office, e.g. in the Financial history.
13.52 EUR
Status
Gateway status of the transaction (e.g. 9 - Payment requested)
9
Name
Name of the buyer
John Doe
Brand
Payment method of the transaction
iDEAL

Example:

2.1.2 Your balance

Reconciliation Your balance

This view allows you to check your current account balance at Ingenico Financial Solutions. A timestamp indicates the last update of the balance.

The first section shows the balance overview (total) per settlement currency.

The second section shows the Balance summary of the selected settlement currency, per operation type (Transaction, refunds, chargebacks, fees and miscellaneous costs). You can change currency using the dropdown menu if your account supports multiple settlement currencies.

By clicking on the button “Details”, you can check all "Account and processing fees" and "Transaction and financial service fees" details which have occurred on your balance.

Reconciliation Your balance

Your current “balance amount” is equal to the “Transaction and financial service fees” minus the “Account and processing fees”.

Here is the description of the view:

Name   Content Example
Account and processing fees
Operation code Operation type (See non-transactional “Operation types” in push report guide for all possible values) NAST
Details The description of the operation Account setup
Transaction and financial service fees
Pay ID Payment unique identifier 100633195
Merchant transaction ref Merchant Order ID order123ab
Order description Merchant Order description abc
Order date Date of the order 2014-08-07
Payment date Transaction date (yyyy-MM-dd) 2014-08-07
Transaction amount

The total amount of the transaction or group of transactions (including acquirer fees).

This is the amount you see in the back office, e.g. in the Financial history.
14,31 EUR
 
Interchange amount (available from 01/2015) Fee paid between banks for the acceptance of card based transactions (expressed in the smallest unit of the currency used).
Scheme Fee
Scheme fee
0,10 EUR 
Fx Rate Exchange rate
0,12
Fx Fee
Exchange fee
0,10 EUR
Gross amount Transaction amount expressed in the merchant’s currency
13,52 EUR
Net amount The amount you receive on your bank account (=gross amount minus the acquirer commission, chargebacks and other costs) 13,52 EUR
Status Gateway status of the transaction (i.e. 9 - Payment requested) 9
Name Name of the buyer John Doe
Payment method Payment method of the transaction iDEAL

2.1.3 Payout

Reconciliation Payout

This view allows you to see the payouts which have been done by your acquirer/collector.

A search section allows you to limit the list based on payout date, payout amount or payout reference.

The table shows the list of payouts with amounts, sorted by date (last one first). The payout reference is the number mentioned in the structured communication of the payment visible on your bank statement.

By clicking on the green arrow on the left, you can see the payout details and all associated operation type (Transaction, refunds, chargebacks, fees and miscellaneous costs, reserve adjustments or direct debits). You can download details by clicking on the button “Download complete report”. The file structure is described in the Push Reports guide.

Reconciliation Payout details

By clicking on the button “Details”, you can check all "Account and processing fees" and "Transaction and financial services" details which are associated to the selected payout.

Reconciliation Payout details

Your current “Payout amount” is equal to the “Transaction and financial services” minus the “Account and processing fees” minus the “Payout operations”.

Here is the description of the view:

Name   Content Example
Account and processing fees
Operation code Operation type (See non-transactional “Operation types” in push report guide for all possible values) NAST
Details
The description of the operation Account setup
Transaction and financial services
Pay ID Payment unique identifier 100633195
Merchant transaction ref Merchant Order ID order123ab
Order description Merchant Order description abc
Order date Date of the order 2014-08-07
Payment date Transaction date (yyyy-MM-dd) 2014-08-07
Transaction amount

The total amount of the transaction or group of transactions (including acquirer fees).

14.31 EURO
Interchange amount (available from 01/2015) Fee paid between banks for the acceptance of card based transactions (expressed in the smallest unit of the currency used). 0,10 EUR
Scheme Fee
Scheme fee
0,10 EUR
Fx Rate

Exchange rate

0,12
Fx Fee
Exchange fee
0,10 EUR
Gross amount Transaction amount expressed in the merchant’s currency
13,52 EUR
Net amount

The amount you receive on your bank account (=gross amount minus the acquirer commission, chargebacks and other costs)

0,10 EUR
Status Gateway status of the transaction (i.e. 9 - Payment requested) 9
Name Name of the buyer John Doe
Payment method Payment method of the transaction iDEAL
Payout operations (ie. reserve adjustments and direct debits). (available from 01/2015)
Operation code Operation type (See non-transactional “Operation types” in push report guide for all possible values) NDDP
Gross amount Empty for non-transactional details
Net amount The amount of the operation + currency 10 EUR
Details The description of the operation Direct debit

2.2 Configuration

At the top of the configuration screen, you will see the "Electronic Reporting" section of your account. The section will propose pre-configured reports. Payout Reports are sent every time the acquirer or collector confirms the payment of the money on your bank account.

Reconciliation Configuration

You can activate:

  • The “Payout report” which includes only transactional data (Transactions, refunds, chargebacks, chargebacks reversal).
  • The “Payout Report including non-transactional data” which includes both transactional (as mentioned above) and non-transactional data if applicable (ie. Account/service setup fees, monthly/yearly fees, payout fees, additional refunds/chargebacks/authorization fees, reserve adjustments and direct debits).

    If you have configured push reports before October 2014, you may still have old versions of reports configured, as follows:
  • Payout Confirmations sends a daily report with transactions for which the payment has been confirmed by the acquirer.
  • Reconciled Payments sends a report of the day's reconciled payments (payments for which you've performed the reconciliation). This functionality and report has been discontinued as of October 2014.
  • Payout Reference (Full Service) sends a report with the reference number mentioned in the structured communication of a payment on your bank statement.

    Note: You need to have the Push Reports option activated in your account for this feature to be operational.3 reconciliation push reports are included by default for Full Service merchants.

    You can see the file structure in the Push Reports guide.

2.3 Download

Reconciliation Download

In the Reconciliation Download screen, you can download two types of reconciliation reports:

  • The “Payout report” which includes only transactional data (Transactions, refunds, chargebacks, chargebacks reversal)
  • The “Payout Report including non-transactional data” which includes both transactional (as mentioned above) and non-transactional data if applicable (ie. Account/service setup fees, monthly/yearly fees, payout fees, additional refunds/chargebacks/authorization fees).

    You can download based on payout date (the date on which the acquirer/collector confirmed the payment of the money on your bank account) or payout reference (the number mentioned in the structured communication of a payment on your bank statement

    Furthermore, you can choose the file format you want to download your report in: "csv" or "txt".

    The file structure is described in the Push Reports guide.

2.4 Dispute (Full Service only)

The dispute module shows the transactions involved in the dispute life cycle, including retrieval requests, first and second chargebacks, representments.

Reconciliation Dispute

The transactions are grouped together by the Acquirer Reference Number (ARN), which acts as a unique identifier for the chargeback life cycle. It is possible to search for retrieval requests or chargebacks using the posting date, some reference of the card number, card scheme, reason code or acquirer reference number.

Name 

Content Example
Posting date The processing date of the dispute 2014-10-16
Item type

Possible values are:

  • Retrieval request: it takes place when the issuer wants to obtain information about a transaction charged to one of its cardholders.
  • 1st chargeback: First chargeback from the issuer.
  • Representment: A second presentment of the transaction to the issuer.
  • 2nd chargeback: Second chargeback from the issuer.
1st chargeback
Card number Card number ************0143
ARN The Acquirer reference number (ARN) is the same for all transactions in the dispute life cycle.  74008503273338307683984
Reason code

The card scheme dispute reason code (Not filled for all item types.)

Please find a list of possible reason codes here (docx file download).

83
Reason description The card scheme dispute free-text description of the reason code. (Not filled for all item types.) Fraud-Card Absent Environment
Currency The currency of the acquirer dispute account to which the transaction is posted. EUR
Amount The amount of the transaction, expressed in the account currency. 36.24
CCN The issuer reference number (Chargeback Control Number/CCN) for the transaction. (Not filled for all item types.) 941679
Original posting date The posting date of the original presentment. 20130930
Original transaction date The transaction date of the original presentment. 20130930
Transaction type Transaction type of the original presentment. Purchase
Merchant settled amount The amount settled with the merchant for the original presentment in the merchant funding currency (that is, the amount posted to the merchant account), before the deduction of any charges. 36.24
Network settled amount Currency and amount settled with the payment network for the presentment (that is, the interchange settlement amount), before the deduction of any charges. 36.24
Original slip The internal slip number of the original presentment. 33830768659
Item slip The internal slip number of the transaction (that is, of the 1st chargeback, representment, and so on). 34135120814
Auth code The authorisation code of the original presentment. 127309
Batch number The batch number provided by the submitter of the original presentment. OGV131001_01
Merchant DBA The “Doing Business As” name of the merchant. Ingenico ePayments
Merchant transaction ref The merchant’s transaction reference number. 20604728
Capture mode Transaction data capture method eCommerce
Payid Ingenico ePayments payment unique identifier 100633195

When a search has been performed, you can also download the displayed information in csv.

3. Reconciliation status

The Recon. Stat. (Reconciliation status) field, visible in the transaction details screen via View transactions, gives information about the financial processing of the transaction.

These are the possible statuses:


Full Service  Other (Non-Full Service)
Payments Transaction processed
Sent for clearing
Received by Ingenico
Paid by Ingenico
Transaction processed
Sent to acquirer
Paid by acquirer
Refunds Refund pending
Refund processed
Refund refused
Refund pending
Refund processed
Refund refused
Bank transfers Waiting for payment
Received by Ingenico
Paid by Ingenico
Expiration initialized
Expired

This website uses cookies to be able to give you the best user experience. If you don't want to accept these cookies, we allow you to change the cookie settings. Click 'Accept' to allow all cookies from this website.

Cookie settings

Introduction

Functional

Functional cookies are required for the website to operate correctly. These cookies cannot be disabled.

Optimized

Optimization cookies allow us to analyze site usage so we can measure and improve our website.
This is the default level.

Personalized

Personalization cookies are used for social media and advanced personalization. They allow us to show you information related to your company.


Example functionality allowed

  • Store country preference
  • Store language preference

Example functionality not allowed

  • Saving personal data
  • Anonymous tracking via Google Analytics
  • Tracking for remarketing purposes

Example functionality allowed

  • Store country preference
  • Store language preference
  • Anonymous tracking via Google Analytics

Example functionality not allowed

  • Saving personal data
  • Tracking for remarketing purposes

Example functionality allowed

  • Store country preference
  • Store language preference
  • Anonymous tracking via Google Analytics
  • Serve content relevant to your interests
  • Serve ads relevant to your interests
  • Tracking for remarketing purposes

Example functionality not allowed

  • Saving personal data